Indycars
Well-Known Member
Thanks HenrysT, I will be making some cuts in the future and that's some good info. What do you mean by Roll Off?
Wanted Enclosed Car Trailer
- Thread starter Indycars
- Start date
Indycars
Well-Known Member
A canopy can be a god send when it 95°F out. I remember back in my racing days and the
10x20 foot canopy I had, wearing a drivers suit and working on the kart. Also had lots of
people stopping to use the shade.
Indycars
Well-Known Member
It's official, I placed my order with Rich at R&M Race trailers. Monday Rich will get
back with me and give me a better date on delivery. He estimates that it will take about
3 months because of the 30 amp breaker panel (CT606A). I have 4 months before the
NTBA Nationals in Townsend TN.
Final Configuration:
.
back with me and give me a better date on delivery. He estimates that it will take about
3 months because of the 30 amp breaker panel (CT606A). I have 4 months before the
NTBA Nationals in Townsend TN.
Final Configuration:
.
Ever seen silicone after a few expansion/contraction (heat/cool) cycles, and the edges are loose from the base material? You rub your fingers on it and it just "rolls off" from the base material? Seen where people use it around skylights etc. and wonder why it's leaking.
old round fart
Well-Known Member
Don’t see anything about Chinese tariff. What happened to that? Did he wave it? Sounds like you will be real happy with that! Congrats!
Indycars
Well-Known Member
Yeah, it's there! It's nearly the last line called "Factory Sur Charge" for $815. I asked about
US steel, but didn't get an answer. I'm sure they are not going to make a change that doesn't
show up in there normal day-to-day business as an option. Now if my name was John Force,
or I looked like Courtney Force, it might have been a different story !
US steel, but didn't get an answer. I'm sure they are not going to make a change that doesn't
show up in there normal day-to-day business as an option. Now if my name was John Force,
or I looked like Courtney Force, it might have been a different story !
Yeah, it's there! It's nearly the last line called "Factory Sur Charge" for $815. I asked about
US steel, but didn't get an answer. I'm sure they are not going to make a change that doesn't
show up in there normal day-to-day business as an option. Now if my name was John Force,
or I looked like Courtney Force, it might have been a different story !
Just their MONEY !!
old round fart
Well-Known Member
Oh. I thought it was a grand before. My bad.
Indycars
Well-Known Member
I think it was, but that was when the trailer total price was over $10,000, now it's only $8850 !!!
Somehow that doesn't make me feel much better !
old round fart
Well-Known Member
Where is the factory?
Indycars
Well-Known Member
It's in Waco Texas and no I can't pick it up myself and save $550. I asked, Texas started
demanding that taxes were paid since it was being sold there.
old round fart
Well-Known Member
Should have known you had figured that out! As usual you are way ahead of me! Lol
Indycars
Well-Known Member
I have another question, since I have the drawing for my approval now and it does not
show a location for the fuse panel.
Where do I put the fuse panel for my 110v service? Any opinions?
The fuse panel will be powered by what they call a life line (extension cord) that drops
thru a hatch in the floor.
show a location for the fuse panel.
Where do I put the fuse panel for my 110v service? Any opinions?
The fuse panel will be powered by what they call a life line (extension cord) that drops
thru a hatch in the floor.
Don't remember if you have floor cabinets, but put it in one or in a wall cabinet up high.. That way you wont be tripping over it.
I think it will come through the front wall and possibly through the floor.
Brown cover under red cabinet is my power distribution center and 10/3 gauge wire to the outside plug that went through the floor.
Yours will look like a house panel with breakers inside and will not furnish 12v to trailer or a battery charger built in.
I think it will come through the front wall and possibly through the floor.
Brown cover under red cabinet is my power distribution center and 10/3 gauge wire to the outside plug that went through the floor.
Yours will look like a house panel with breakers inside and will not furnish 12v to trailer or a battery charger built in.
Indycars
Well-Known Member
I decided to put the fuse panel 12 inches off the floor and 12 inches from where the V-Nose
meets the side wall. It will eventually be inside a cabinet. In this location I figure it will be
easy to route the extension cord to either side of the trailer depending on where 120v power
is coming from. This is contrary to the typical location on the driver side wall according to
R&M Race Trailer. I wanted to open the side door and without going inside, just drop the
extension cord thru the floor. Time will tell if it works according to plan.
meets the side wall. It will eventually be inside a cabinet. In this location I figure it will be
easy to route the extension cord to either side of the trailer depending on where 120v power
is coming from. This is contrary to the typical location on the driver side wall according to
R&M Race Trailer. I wanted to open the side door and without going inside, just drop the
extension cord thru the floor. Time will tell if it works according to plan.
Indycars
Well-Known Member
My trailer was supposed to be finished today, so I'm waiting to hear when my dealer
R&M Race Trailers will get it in for me to pickup. I've buying accessories in the mean
time and one of those is a tracker. I bought the Oyster 2 from LoneStar Tracking.
They just got them in, they have been on back order for several weeks.
In fact I'm using my tracker to track my shipment of the Oyster 2. LOL !
.
R&M Race Trailers will get it in for me to pickup. I've buying accessories in the mean
time and one of those is a tracker. I bought the Oyster 2 from LoneStar Tracking.
They just got them in, they have been on back order for several weeks.
In fact I'm using my tracker to track my shipment of the Oyster 2. LOL !
.
