Ron Pope Motorsports                California Custom Roadsters               

The build is now beginning

The 400 turbo is next to be rebuild.
This will be my first auto trans.
It can be done. I built my first trans for my TBucket, it was an OD trans 200-4R.

Have you bought the ATSG manuals or any videos?

ComponentLineup_3129.jpg
 
Take care not to get any debris inside. I like to power wash and remove most external crud prior to disassembly. A little junk can cause a seal to leak, etc. also be mindful of rag selection due to lint, etc.
 
Started with a 2" air sander and then sand blasted followed by a DA with 360 and 400 grit. If you are worried about the sand then you should be worried about the grit that comes off every abrasive wheel and grinder you use on the casing.

Just needs a more than thorough wash and clean. Did mine in an industrial hot wash followed by a pressure wash (in every hole and place I could find) then an air blow and finally another hot wash. Seemed to work for me. Powder coat is quite forgiving.Pic below may look rough but its whats underneath the final picture finish.

Oh, and the black fade is because I have around 1" of bell housing sticking out in front of the fire wall. This way there is just black, and no black/Chrome line. Powder coater was more excited about doing this than I was....

chrome powder coat gm350 (3) [640x480] [640x480] (2015_11_13 11_07_31 UTC).JPG

chrome powder coat gm350 (10) (2015_11_13 11_07_31 UTC) (Copy).JPG

chrome powder coat gm350 (20) (2015_11_13 11_07_31 UTC) (Copy).JPG

chrome powder coat gm350 (32) (2015_11_13 11_07_31 UTC) (Copy).JPG

prop shaft (4) [640x480] [640x480] (2015_11_13 11_07_31 UTC).JPG

trans case fresh chrome (14) [640x480] [640x480] (2015_11_13 11_07_31 UTC).JPG

trans case fresh chrome (34) [640x480] [640x480] (2015_11_13 11_07_31 UTC).JPG

trans in after build 2 (21) [640x480] (2015_11_13 11_07_31 UTC).JPG
 
Last edited:
Now that's a beautiful trans case !
 
Whatever happened to this project? 'JonRod' Walker posted this pic on fb about a year ago . . .
 

Attachments

  • jonrods T.jpg
    jonrods T.jpg
    457.3 KB · Views: 28
Gerry is in the UK. Berkshire London.
Things may be tough with Covid and the economy.
Last I saw was him towing the car to a show around 2019 / 2020 Not quite finished, but not far from it.
 
You're correct about Gerry, Bruce. But the thread was started by JonRod and he is on this side of the 'pond.'
 

     Ron Pope Motorsports                Advertise with Us!     
Back
Top