CCR front shocks chassis set up.

[cooter]

Need some help layin out my front shocks. Ill post pics as soon as i can but it looks like my shocks will hit tie rod? Any pics of this set up appreciated.

 

[Indycars]

Does it need to be CCR, or would any pics help?

 

[cooter]

Any pic will help. Im building s CCR chassis so you know what it looks like up front

 

[RESINATOR]

 

[RESINATOR]

If the tie rod is somehow in the way because your arms or axle brackets are wrong then you may need a longer shock stud that goes thru the 3 hole plate, I think SoCal makes one that is 1/2" longer then the ones we sell

 

[cooter]

If the tie rod is somehow in the way because your arms or axle brackets are wrong then you may need a longer shock stud that goes thru the 3 hole plate, I think SoCal makes one that is 1/2" longer then the ones we sellView attachment 11728

Now i know how bottom plate goes on shackle.

 

[cooter]

What is distance from king pin center to tie rod end center on that steering arm?

 

[cooter]

T-Bucket Forums what length is this shock?

 

[one finger john]

Resinator, can the tie rod still be behind the axle with the shorter bat wings?

John

 

[RESINATOR]

It's the same as the Plans specify, 5.25"
The shocks are our short gas charged rod shocks (around 10.5" ride height), but you need to set this up for your chassis. Get the shock towers and lower mounts (we make four different ones) installed and then figure the length or install the lower mounts and get shocks and build the tower to match that.(having the car mostly assembled would be best) Sorry, I could be a lot more specific about what you need if these were our parts.

 

[RESINATOR]

John, when using the shorter batwings/ RR hangers the lower stud or mounting point would change and the tower is moved back

 

[butch27]

Res. You sure make some nice parts.