Ron Pope Front End

[FordTBucketKid11]

Does anyone have a Picture useing ron popes front end that they can post so i can use as a reference?

 

[Keeper]

If you go through the pics in my sig, there are a ton of pics.

 

[FordTBucketKid11]

Thanks Keeper. Can u get me some more pictures of your steering arms and stuff to as well?

 

[Joe-405]

All of my stuff is Ron's also. You know where my build thread is. There is alot and its easier to just go to that thread.

the master cylinder, front end, headlight and front shock mount in one, transmission mount and steering box mount are all his also if it helps.

I dont have the steering box mount picture up yet cause i originally had a speedway one that was junk that cost $80.00 ! This be a case of you DONT get what you pay for on that one.

 

[Keeper]

All the pics are in the links of my signature. I made those arms, so it shows my process of determining size/shape.

 

[FordTBucketKid11]

Thanks Guys.. Helps me out a lot.. I was wondering what the different holes on the batwings were for? like where u put the radius rods at?

 

[Keeper]

They can really only go together one way. top-bottom holes are for the radius rods. Middle is for the spring mount.

I think some of them have 4 holes, I think the very top hole is for a shock mount.

 

[FordTBucketKid11]

Thanks Keeper..

 

[RPM]

All you have to do is give me a call. You even have my cell number. I am here from 6 am till 10 pm. I'll be glad to answer all your questions for you.

 

[FordTBucketKid11]

Trust me i will be.. I just needed a Visual of what i am to be doing..