bentbaggerlen
Member
Getting to the point in my build to get busy with the body. For a little back round it's a Spirit body and I will be using the seat insert.
I plan on adding some fiberglass cloth to stiffen and build up some parts of the body, such as the rear of the tub and the windshield mounting area. I also want to reinforce the area were the dash meets the top rail as its very, very thin. I'm going to reinforce the body around the upper lip all around the tub, as well as the fire wall area with plywood.
I also have to repair some damage from shipping. The trucking company broke off one of the ears on the firewall, so I need to repair that. And I also need to build up and repair the lower lip of the dash, I found a big air bubble between the gel coat and fiberglass. The gel coat cracked and fell off leaving about 3" of the lower lip of the dash missing. So I'll need to build that up.
I'm looking for advice on brand names and suppliers for
What would be the best product to glue in the plywood wood floor?
Fillers for low spots in the glass and the dash lip?
I plan on adding some fiberglass cloth to stiffen and build up some parts of the body, such as the rear of the tub and the windshield mounting area. I also want to reinforce the area were the dash meets the top rail as its very, very thin. I'm going to reinforce the body around the upper lip all around the tub, as well as the fire wall area with plywood.
I also have to repair some damage from shipping. The trucking company broke off one of the ears on the firewall, so I need to repair that. And I also need to build up and repair the lower lip of the dash, I found a big air bubble between the gel coat and fiberglass. The gel coat cracked and fell off leaving about 3" of the lower lip of the dash missing. So I'll need to build that up.
I'm looking for advice on brand names and suppliers for
What would be the best product to glue in the plywood wood floor?
Fillers for low spots in the glass and the dash lip?