Valve cover baffles . . .

[fletcherson]

On my sbf I made a breather that mounts to the fuel pump mount since I have an electric pump. You can buy the breathers from K&N.
I just used a 3/4" 90* piece of conduit and cut it to my liking, then welded it to an old FP block off plate.

Cool idea! I like outside of the lines ideas.

 

[HenrysT]

Lets see if I can post a pic of what I am planning on doing...
I have some bolt on Offy breathers, ground the contour of the valve cover corner, made a jig to hold it while it gets welded. I have to find a welder to do it. Next would be to figure out what size hole(s) to drill in it, I'm using a PCV valve on the oil filler neck mounted on the intake man.

 

[2old2fast]

Do those offy breathers have some type of filter media in them or are you gonna just suck all the dirt through your engine ?

 

[HenrysT]

Two layers of sponge sandwiched by 3 s/s mesh screens. The sponges are the black things in the center along with the screens. (click on the thumb nail)

 

[PotvinGuy]

Henry, do you have a pic of the PCV valve on the oil filler neck? Sounds trick!

 

[HenrysT]

It's a stock set-up for 67-68 I think, just had to make sure to get the right PCV.

 

[HenrysT]

1967 Camaro Oil fill tube 327 black w/PCV - 1967, 1968, 1969 Camaro Parts - NOS, Rare, Reproduction Camaro Parts for your Restoration