Garage Merch                Ron Pope Motorsports                California Custom Roadsters               

C cab On Model A chassis

Popeye

Member
Has anyone put the C cab from rod race on a Model a chassis. I got a free chassis off craigs list. I have the rearend, front end, steering columbe and box a gas tank two doors and the upper part of a cowl. and a few years ago I found a compleat flat head V8 from carb to the transmition in the trash, brought it home cleaned the points and she fired right up. So I figured I could make a nice rod with these parts. And does any on have the skiny motorcycle wheels that you see on the Tbuckets I don't care if they are rusty and pited. Im a body man and can do wonders with bondo and paint.
 
This is what I have so far not much but a start will have more pics this weekend. I have put front wheels on the chassis and steering columb on after the photos were taken. I see my pics limit is getting low will I have to delete some when I run out or how does that work would like to post my progress as I progress.
 
Cool start :lol:


For pics, I use photo bucket for online storage. That way i don't have to delete pics to add more.
 
did you swap out that Model T axle for something else.

Ron
 
No I still have the T axle under it right know. don't know what I am going to do there , because the Flat head dosen't have the provitions for the wishbone to mount to. Might have to fab somthing up. I should have time this weekend to put the flat head in.:cool:
 

     Ron Pope Motorsports                Advertise with Us!     
Back
Top