Posie Superslide Question

[Neal]

I was thinking about using one of Posie's superslide springs on my 23 T.I was looking at the 29" reversed eye ones.They have stock,1"and 2" drop.They are the ones for the Model A.I am not very sure which one to use.Any suggestions would be greatly appreciated.Please let me know if I need to give any measurements.My axle is a 4" inch dropped Ibeam.It measures 34" from the perch bosses to perch boss.Thank you for the help.
Neal

 

[putz]

I was thinking about using one of Posie's superslide springs on my 23 T.I was looking at the 29" reversed eye ones.They have stock,1"and 2" drop.They are the ones for the Model A.I am not very sure which one to use.Any suggestions would be greatly appreciated.Please let me know if I need to give any measurements.My axle is a 4" inch dropped Ibeam.It measures 34" from the perch bosses to perch boss.Thank you for the help.
Neal

Is it mounted over axle or behind that is a big factor. and how much clearance are you looking for a standard eye will give more clearance. 29 inch should work. here is there chart for what springs.
posie link

 

[Neal]

Is it mounted over axle or behind that is a big factor. and how much clearance are you looking for a standard eye will give more clearance. 29 inch should work. here is there chart for what springs.
posie link

Thanks Putz.Its mounted behind the axle.Thank you for the link.I am checking that out.

 

[blownt]

I got a Posie spring on mine with the rubber or teflon buttons in the leaves. I will have to measure mine but I think it is about 29". It has the reversed eyes. Back when I bought mine there were no 1" or 2" drop. Just stock eyes or reversed eyes. I would go with the stock if you are using the reversed eyes. I got a 6" drop axle so it sits LOW anyways.







I was thinking about using one of Posie's superslide springs on my 23 T. I was looking at the 29" reversed eye ones. They have stock,1"and 2" drop. They are the ones for the Model A. I am not very sure which one to use. Any suggestions would be greatly appreciated. Please let me know if I need to give any measurements. My axle is a 4" inch dropped Ibeam. It measures 34" from the perch bosses to perch boss. Thank you for the help.
Neal

 

[Neal]

thanks blownt.I have a 4" dropped axle with the spring mount behind it.I actually ordered a spring today with the 2" drop.Hopefully I didn't screw up.I am just ready to finish it and drive it.We had the Billetproof car show here on Saturday and that didn't help matters..lol..Awesome show..Thank's for the help.
Neal