Ron Pope Motorsports                California Custom Roadsters               

Search results

  1. M

    model a rear crossmember

    Thanks for the info youngster. Ill have to keep my search for an original, so cal speed shop is way to expensive anyway I can't believe they want 400 for a crossmember and from what you have said sounds like you have to put a few more bucks into it to make it right. Pretty sure the posie...
  2. M

    model a rear crossmember

    Hello all, I am not having good search results in locating a model a rear crossmember for my build, but have found a couple places that make a new reproduction crossmember but they want between 3-4 hundred. So basically my question to you all is if I could possibly find specs and have a steel...
  3. M

    medium arch rear spring

    Awesome, thanks youngster I appreciate your help.
  4. M

    medium arch rear spring

    Would I be able to use my 9" ford rearend with the speedway motors medium arch rear spring? I can't find any measurements besides height and length of the spring. It says to be used with a centered pinion rear end like the winters quick change. I was hoping someone could give me an answer before...
  5. M

    What welder for a beginner?

    I have a Lincoln 180c that is awesome but if you want a cheaper 220 welder check out Eastwood.com. They have a pretty good looking welder, $299 for a 110v and $499 for a 220v and the 220v machine comes with a spool gun at that price. Benefit of Eastwood over a hobart or others is that it has an...
  6. M

    CCR smooth body dimensions

    Chief t, thank you very much. Also do you have the measurement of the firewall width at the front of the body?
  7. M

    CCR smooth body dimensions

    Chief t, I need the width at the firewall from inside the channel side to side and at the rear of the body from inside the channel at the farthest point where the body sits on the frame. Also I need firewall width looking at the front of the body.
  8. M

    CCR smooth body dimensions

    Do you have dimensions for the bottom of the body and front width and rear width?
  9. M

    CCR smooth body dimensions

    Hey guys. Does anyone have the dimensions for the CCR smooth stretched body with channeled floor? I need all dimensions as well as the bottom of the body if anyone can help me if appreciate it. Thanks guys.
  10. M

    sitting low

    T-odd, thank you for the info and pics. Definitely gives me more of an expliantion to go about my plans, im a visual person. Also Dons rod is awesome! I love the colors, love the stance, very well put together in a clean and simple way. his motor seems to be mounted a little high though I think...
  11. M

    sitting low

    Leg show t, yea I still need to edit my profile. I'm not on here all to much unless I have a question. As soon as I start building I will have tons of photos, my first build so I'm gonna take pics of everything. Right now I am putting it on paper to get a view and make my brackets. Having a hard...
  12. M

    sitting low

    No not to interested in the 27 body, I like the extra leg room offered but a 23 stretched t body alone is what I am leaning towards. Actually similar to the T build by Joe in the streetrodder website was what I had in mind, with a similar round fuel tank. Im young, I want something modern yet at...
  13. M

    sitting low

    Putz, yes I have been on a t bucket. My uncle had a total performance kit made, not much foot/leg room for me bring 6' that is why I am looking at a stretched body. I like the CCR body but its very expensive but yet I could pickup and not have to pay for shipping. T odd, what do you mean by...
  14. M

    sitting low

    Hey thanks Larry. Not to thrilled with the looks of the z'ed frame, most likely won't go that route. I like the idea of a higher spring perch and a 5 or 6 inch dropped axle. Hey guys also is there any shops in CA that make a good quality 23 (stretched) body preferably other than CCR? The...
  15. M

    sitting low

    Gotcha, thanks guys. How about a double z bar frame? Ever seen one done on a 23 T, if so where was the front kickup started? I would imagine right aft the firewall of the body correct?
  16. M

    sitting low

    Hey whatsup guys, I was cruising through streetrodderweb.com and found this t bucket built by Joe Leone. Very nice T he has, but I actually had a question for you guys about his T. How did he get the frame to sit so low? I know about z bar'd frames and the kickups, also notching the frames for...
  17. M

    Class Glass Bodies

    Rooster, thsnks for the advise I appreciate it. Do you know if ccr makes a original body (not smooth) that's a stretched body. Also what do you think of the class glass body, looks like a nice stretched body at a good price. Thanks for your help.
  18. M

    Class Glass Bodies

    Rooster, your t is awesome. question to you though, I am getting ready to start my first t build and have been looking to purchase the body so I can start my chassis. I was going to go with the 27 t but then I found stretched 23 T's. Okay my questions is is the 23 stretched smooth t worth the...
  19. M

    speedway t bucket frame plans/dimensions

    Rpm, what's your price for body without door, 20" pickup bed and floor installed? How about with that seat insert installed as well?
  20. M

    27t frame plans

    So basically you would extend the main rail lengths in the difference of the wheelbase?

     Ron Pope Motorsports                Advertise with Us!     
Back
Top