Ron Pope Motorsports                California Custom Roadsters               

Search results

  1. Dan the Man

    radius rod mounting spot

    You just want to have the mount point as close to the steering arm if you are using a Vega type steering box. This will minimize the bump steer. I would never drill through the frame if I can avoid it. If you drill through the frame I would use a thick bushing or sleeve and weld that in place.
  2. Dan the Man

    electric fuel pump problem? Thats a maybe.

    I have had a similar problem. The Holey Red pump works fine some days and others its shuts off. If I let it sit for a couple minutes, it starts working again. It used to make noise, now I dont hear it running. Checked all the wiring and it is all good. Ordering a new Summit pump today.
  3. Dan the Man

    Electric fan thermo switch

    Is your thermo switch the ground for the fan? I use a relay to control the fan. The thermo switch grounds the relay triggering the on/off.
  4. Dan the Man

    Progressive Throttle Linkage ???'s

    How many of you are running twin carbs and using a progressive throttle linkage? What are the pros and cons of them? Did you do it for performance issues or fuel economy? Did you notice any difference in fuel economy? I'm asking because it has been suggested I switch to a progressive...
  5. Dan the Man

    Getting VIN and Registration in CA

    DMV can only issue VINs for trailers. CHP does them for vehicles. The key I found out is to go to DMV and ask for them to issue a Certificate of Sequence. This starts the whole process. At that time they will also give you a bunch of forms to fill out. Then you can go to CHP for a VIN...
  6. Dan the Man

    Getting VIN and Registration in CA

    We loaded it on a trailer and took it to a Certified Inspection shop. They check to make sure all lights work properly and visually inspect the brakes. Then they made me do a physical stop test by taking the car to 20 mph and then stopping in less than 20 feet.
  7. Dan the Man

    Getting VIN and Registration in CA

    Thank you very much for the information. I will have to add the PVC valve but otherwise I am good. I already got a Brake and Lamp Inspection.
  8. Dan the Man

    Getting VIN and Registration in CA

    Has anyone in CA built a new bucket from scratch? How do I go about getting a VIN assigned and then registering it in CA without smog??
  9. Dan the Man

    Bonding to existing fiberglass

    What exactly are you trying to do or bond?
  10. Dan the Man

    NTBA

    What is NTBA and what is the web address?
  11. Dan the Man

    Brake system for Hot Rods

    What is the reasoning for the Residual Pressure Valves?
  12. Dan the Man

    Friction Shocks

    I used the Offenhauser ones from Speedway. Had to make my own brackets. So far I have been up to 80 mph and no issues. I can see the front end move and it seems to be rather responsive. Most of my friends question me as to why there are no front shocks. I have to show and explain them to...
  13. Dan the Man

    Friction Shocks

    Is anyone using friction shocks on the front end. I built mine with them and so far have had on complaint, although I have only driven it about 5 miles.
  14. Dan the Man

    Steering stabilizer

    It is about 5 degrees.
  15. Dan the Man

    Steering stabilizer

    So I have no steering issues other than it turns too free and easy. I would like some sort of resistance. Will a stabilizer help?
  16. Dan the Man

    Need Ideas for Building a Tonneau Cover

    I am looking for ideas to build a tonneau cover for my 23T pickup bed. I would like it to be able to open and close and be lockable. Please attach pictures of what you have done or seen.
  17. Dan the Man

    Best adhesive for fiberglass

    Gorilla Glue has worked awesome for me. Better not make a mistake and try to remove it.
  18. Dan the Man

    Electric Fans . . . . Thoughts and Experiences

    Try running a 165 degree or 170 degree thermostat. It's not going to hurt the engine other than slightly over fueling it if you are using a EFI system. If it is a carburetor, you will have no worries.
  19. Dan the Man

    Loctite marine fast cure adhesive

    I was having the same question. Just got the body painted and now I need to do the upholstery. Was wondering what was the best adhesive to use to attach the boards so I can screw/staple the upholstery in place.
  20. Dan the Man

    Windshield Mounts

    Got the windshield bracket mounted by the suggestions above. Worked out great. I even added long nuts into the molds for the bolt from the dash side hole. Thanks for the pictures and advise. Now, any suggestions and pictures on how to mount the fiberglass radiator shell?

     Ron Pope Motorsports                Advertise with Us!     
Back
Top