I am working on getting a Spirit body ready for paint. Some of the low areas by the mold seams are 1/4 inch deep. Looking for technique/materials to fill these low spots.
Any good brand of bondo is good for fill sand the area real rough with 40 grit sandpaper I like to put a little kitty hair in the mix and don't fill more than 1/8 inch deep at a time let it set till it's hard sand it good and finish filling. Good luck with your project.
Any good brand of bondo is good for fill sand the area real rough with 40 grit sandpaper I like to put a little kitty hair in the mix and don't fill more than 1/8 inch deep at a time let it set till it's hard sand it good and finish filling. Good luck with your project.
Thank you for visiting the T-Bucket Forums! This site was created in 2006, to provide enthusiasts with a place to discuss T-Buckets. Over the years, there have been many imitators, but this is the T-Bucket resource you have been looking to find. We encourage you to register a FREE account and join in on the discussions.