Ron Pope Motorsports                California Custom Roadsters               

Anyone using a braille battery

oino

Supporting Member
Supporting Member
I'm using a braille battery 2015. Seems to be discharging really quick.
Not sure if its something on my car drawing power from it.
I charge it, starts the car fine, next day dead.

hummm.

Anyway to check for current draw?
Everything seems to be off on the car.
 
IIRC, turn off the ignition switch so there is no power to ANYTHING. Then disconnect the positive battery lead, attach a test light to the lead and to the positive battery post. If the test light glows, even faintly, then something in the electrical system is drawing current. If it is glowing, then go to the fuse block and slowly remove a fuse at a time to see if the glow goes out. Reinstall the fuse and proceed to the next fuse and perform the same operation. Keep on going until the light blinks off and you will know which circuit is active.

John

If this explanation is incorrect, someone please correct me. Its been a while since i've done this stuff.

P.S. It could also be the ignition switch itself.
 
Update.
I gave up on the braille battery.
Installed my battery box today, and a new battery. :)
 

     Ron Pope Motorsports                Advertise with Us!     
Back
Top