broken clevis

[fordsbyjay]

Well if you wanted them mounted in single shear you could just use the original sheer. A rod end is much narrower than they typical bushing so I could see you getting away with it. I was thinking along the lines of keeping the original bracket and just adding another one next to it for a double sheer mount.

 

[EX JUNK]

Well if you wanted them mounted in single shear you could just use the original sheer. A rod end is much narrower than they typical bushing so I could see you getting away with it. I was thinking along the lines of keeping the original bracket and just adding another one next to it for a double sheer mount.

I recommend double shear with rod ends. That is the best set up IMHO.





Jim

 

[2old2fast]

I'll probably catch all kinds of flak for this but.... you're only an 1/16" from being able to use the 5\16" slot clevis , either grind the batwing a little on each side or file the slot in the clevis , you only need .030" per side , IMO not enough to hurt a thing ....
dave

 

[Neshkoro]

I'm going to give it a try and see what happens. I'll let you know when I have a chance to try it.
I don't know what happens to the time. You think you are going to get something done "this weekend" and you don't touch it for months! Go figure.

 

[fordsbyjay]

I'm going to give it a try and see what happens. I'll let you know when I have a chance to try it.
I don't know what happens to the time. You think you are going to get something done "this weekend" and you don't touch it for months! Go figure.

That's my life..