Ron Pope Motorsports                California Custom Roadsters               

Search results

  1. GT63

    Sudden Increase in Blow-by

    I'd go with a forged steel crank with dual keyways since you are running a blower and a matching balancer that has the 6 blower pulley bolt holes in it. You'd be surprised how much stress you're putting on that crank snout with that blower pulley and belt.
  2. GT63

    Sudden Increase in Blow-by

    Lee, I found a speed shop in Garland Texas that is a Dart Dealer. They mainly cater to the racing community, but they were great to deal with. Here's their website. Home High Performance World, Inc
  3. GT63

    Sudden Increase in Blow-by

    Lee, I've been following this thread with much interest. I've been collecting parts for a total rebuild of my T and hope to get started on it this fall. After a lot of research I decided to go with a DART SHP SBC short block that was assembled by Dart and is specifically designed for Street...
  4. GT63

    Blowers/superchargers

    How about Blown and EFI, yes it can be done and is very street friendly.
  5. GT63

    Clothes smell like gas!!!!!Help!

    There's a really good Holley Tuning article in the Fall 2014 edition of Engine Masters Magazine. Some of the engines they build are truly works of art. :)
  6. GT63

    butler c cab

  7. GT63

    Speedway turn signal - - early failure ?

    a quick Google search turned up http://www.truck-lite.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10001&storeId=10001&categoryId=10344
  8. GT63

    Another tunnel ram thread

    If your going for looks, Then EFI Shouldn't be a consideration. It's not easy trying to hide all the wiring required for EFI on an Open engine in a T-bucket. If your going for performance, your less likely to have any one cylinder run lean or rich if the injectors are in the runners...
  9. GT63

    How to Add a Door?

    Here's a link to their Ford Parts page. The door kit is about 15 lines down. http://www.scottrodscustom.com/ford.html
  10. GT63

    How to Add a Door?

    Scott's Rods has a door kit. Been looking at it myself.
  11. GT63

    Another tunnel ram thread

    If I were going to do an EFI Tunnel Ram, I'd put the injectors in the runners as close to the intake head as I could. It gets the atomization close to the intake valve. Something like this. Those are 2000 cfm throttle bodies on top.
  12. GT63

    Jaguar hub upgrade.

    http://www.wisbechengineering.com/home/4576331433
  13. GT63

    Rod & Custom Magazine RIP

    They're still taking subscriptions on their website. I can't find anything on the R&C website about terminating print magazines. Until then, it's just rumor.
  14. GT63

    Tail Light Thread - What looks good?

    Anything LED. The brighter the better. Too many people looking at your car, and don't realize your braking or stopping. I've seen it happen a few times.
  15. GT63

    wheel distance apart.

    Available here : http://www.wisbech-engineering.co.uk/Rear_Axle.html
  16. GT63

    need cam shaft advise .....going nuts

    When I was looking for a Cam, I contacted Comp, Crower, and a few others. I gave them all the specs I could. Comp gave me the usual Sales pitch with muliple recommendations. The reply I received from Crower impressed me the most. It was very detailed and not only recommended the cam, but...
  17. GT63

    Pleass critique my planned fuel sysytem

    Well shortly after I switched I decided to tear the T-bucket down and rebuild it fixing all the things I should have done differently. Then a '76 XJ IRS fell in my lap so I'm in the process of reworking the frame. The New Engine will be a DART SHP SBC 406 cu in, with all steel bottom end and...
  18. GT63

    Pleass critique my planned fuel sysytem

    I did the exact same thing RPM did before I switched to EFI. The Edelbrock 1405's with the chokes removed and the Blower mods ran great.
  19. GT63

    Pleass critique my planned fuel sysytem

    On EFI systems the filters go right before and right after the fuel pump. :) I agree, No need for the second shut off
  20. GT63

    heim ends versus bushed ends

    Kugel Components http://www.kugelkomponents.com/zencart/index.php?main_page=index&cPath=50

     Ron Pope Motorsports                Advertise with Us!     
Back
Top