Ron Pope Motorsports                California Custom Roadsters               

Search results

  1. F

    dyna tech vortex cones

    Thanks everyone for the replies, yea I have the 12 " baffles and packing that came in the sanderson pipe turnouts. Just a little too loud and wanted to quiet the exhaust some. By the youtube review, they don't seem to do much.
  2. F

    dyna tech vortex cones

    Has anyone used these to tone down the side exhaust. I have Sanderson headers and mufflers, and would like to quite them down alittle. I have already repacked my baffles, helped alittle. Any tips would be appreciated.
  3. F

    Tranny pan leaking

    I have a cast aluminum th350 pan and couldn't get it to seal well. I put on the Moroso blue silicone/metal molded tranny pan gasket. A little expensive but worth it. Been over a year and to this day it is dry as a bone. Couldn't be happier!
  4. F

    Is there an easy way to set toe out?

    Is there an easy way to set toe out on a CCR front axle with motorcycle ft wheels and tires? I just changed all the steering joints and would like to know where to take measurments for toe. I put a couple of 2x2's across the tires and wheels and measured, but seemed kinda hokey to me. is there a...
  5. F

    Dynatech 772-32510 Vortex Cone Assembly

    do you think running the auger style baffle in front of the existing baffles would work? Maybe even cut the auger baffle down alittle to fit it behind the collector and in front of the existing baffle.
  6. F

    Dynatech 772-32510 Vortex Cone Assembly

    Wondering if anyone has used these dynatech vortex cones to quiet down their Sanderson muffler turnouts or any otherfor that matter. My exhaust is too loud and at times too raspy for my old ears and I'm looking for something to quiet and mellow them down. If anyone has any other ideas, let me know.
  7. F

    Seat belts

    I have a question for those of you that have belts in your fiberglass bodies. Did or do you anchor the belts to the frame or just to the body. I've pros and cons to both ways of mounting the anchors, some say mount to the body only in case the body separates from the chassis. Others say to the...
  8. F

    Jag rear - need tie bar with Chev

    If I recall I think I remember seeing them listed in the Speedway parts catalog. It's part #91645313, do a search and you will find it.
  9. F

    heim threads

    thanks everyone
  10. F

    heim threads

    Hi Jerry, Looking to replace the 4 worn heim joints on my CCR steering assy, can you tell me what size the heims are that you use on your steering shafts. Thanks
  11. F

    ford lettering

    I'm leaning towards gold leaf with black outline to go along with all the polished brass back there.
  12. F

    ford lettering

    I'm undecided on the color for the Ford script lettering on the rear bed. My car is a fire engine red with white pinstripes on the door outlines and the front cowl. I know it's subjective but I was thinking white lettering with black outline, some say black lettering with white outline. What do...
  13. F

    Dan Woods T Bucket for Sale - in California

    post some pics of it.
  14. F

    Where is this MC from???

    Bill, What kit did you find to replace this M/C with a dual M/C. Robert
  15. F

    Asking on A Jag rearend again .. part 2

    Where can I purchase one of these lower tie plates?
  16. F

    tire pressure/death wobble

    Hey guys, I have a CCR bucket with motorcycle front tires on spoked wheels. I went from 15 pounds of pressure to 22 pounds of pressure in the fronts, went for a drive and the first bump I hit my front end started to bouncing and wobbling. I slowed down and got pulled over and let some air out...
  17. F

    Has anyone used "Car Chemistry" exhaust inserts?

    hey sstock, did those car chemistry 16" long muffler baffles work out ok? Did it decrease the loudness and raspy sound from the exhaust?
  18. F

    ft motorcycle wire wheel center cap removal

    Thanks Jerry, I used a long screwdriver from the back side in the notch and gave it a few taps and it popped off. Just needed positive reinforcement that, that is the way they come off. Thanks again
  19. F

    ft motorcycle wire wheel center cap removal

    Does anyone know how to remove the center caps off the cycle wheels on the front? It looks k=like it has a little notch cut in the center cap, I tried to pry it but it didn't move. Any help out there? I can't post pictures yet, but I can e-mail them to you to see what I'm talking about.

     Ron Pope Motorsports                Advertise with Us!     
Back
Top