RPMWhere did you get that brake pedal assembly?
It mounts on the inside of frame and the pedal on the. right side of the coloum.
Unless you are w/o right leg or it's a rhd car.
The top of the m/c should be just below the floor and a swivel plate to cover it.
This is from RPMBuy a GM m/c from Speedway or RPM .
I don't know what kind your's is, but I wouldn't use it.
Do watch the scrubline ( look in frames and brakes section). The steering box is close to it. Larger rims in front can solve that, but may make you to make other changes.
I don't want it on the firewall.. I bought the under floor mount. I'm gonna see if he has any pics of how he mounts themCan you flip the whole thing upside down and mount it to the firewall with the firewall sandwiched between the pedal mount and the master cylinder?
I don't want it on the firewall.. I bought the under floor mount. I'm gonna see if he has any pics of how he mounts themCan you flip the whole thing upside down and mount it to the firewall with the firewall sandwiched between the pedal mount and the master cylinder?
That's the way it came from RPM. I bought their frame prewelded.I would be more concerned with the steering box hanging so low. The master cylinder could be mounted just below the floor with an access hole to service it.