econoline front beam

[austinb]

I have a t bucket with a econoline front beam and chevy camaro rotors. I need the bushing that makes the spindle surface larger ,that the grease seal ,seals against. Where do I get it and is the grease seal diferent? My spindle surface is about 1.77" and I dont know what size I need to fit the camaro grease seal.

 

[T-Odd]

I don't hae my book handy but the Chester book desribes and gives the part number for hte new grease seal.

You will need a 1/4" space on the outside.

Anyone have a copy of the book handy?

 

[blownt]

ACCORDING TO HIM ON PAGE 45

Econoline axles: pre 1978 Chevy rotors will fit perfectly with the stock Chevy bearings an exact fit. A 1/4" spacer is required between the outer bearing and the flat washer. Extra washers will work fine. The inner grease seal must be changed also. The seal you need is made by CR Industries part number 17406.

 

[hemibird43]

I have a t bucket with a econoline front beam and chevy camaro rotors. I need the bushing that makes the spindle surface larger ,that the grease seal ,seals against. Where do I get it and is the grease seal diferent? My spindle surface is about 1.77" and I dont know what size I need to fit the camaro grease seal.

so i have a chance to purchase a econoline front end out of like a 61 or so , how is it working for you and how does it look