Lake Modified
Active Member
The standard frame and body from Street Rod Fab near Orlando Florida.
SM
pics from my build
- Thread starter Lake Modified
- Start date
The standard frame and body from Street Rod Fab near Orlando Florida.
SM
Lake Modified
Active Member
Grill is from Allis Chalmers tractor..
[/IMG]
Ford 300 big block..... supposedly from a UPS truck
[/IMG]
Ford 300 big block..... supposedly from a UPS truck
Lake Modified
Active Member
Ford top loader 3-speed...
[/IMG]http://i64.tinypic.com/ei613l.jpg[/IMG]
Front end from Speedway...
[/IMG]http://i64.tinypic.com/ei613l.jpg[/IMG]
Front end from Speedway...
Lake Modified
Active Member
Try that again.....
Front end from Speedway..
[/IMG]http://i64.tinypic.com/ei613l.jpg[/IMG]
3- speed manual top loader
[/IMG]http://i64.tinypic.com/98rsco.jpg[/IMG]
Front end from Speedway..
3- speed manual top loader
Lake Modified
Active Member
Well, pics were posting now they are not.....
Lake Modified
Active Member
Lake Modified
Active Member
Front end from Speedway...
[/IMG]
Lake Modified
Active Member
Where I am at right now........... next project is front shocks and cutting the dash out.
[/IMG]
[/IMG]
Lake Modified
Active Member
In the beginning, just exhaust, intake and carb. After it is finished and I see how it is running, will make changes... block is bored 030 over now.Wow! That's looking awesome!!!What mods will you make to the 300 . . . induction, cam, ignition, etc.?
Thanks
SM
Lake Modified
Active Member
hehe....awesome.... mine will have a 6 into 1 or two, haven't decided yet, going down the side of the body...
SM
SM
old round fart
Well-Known Member
I like it! This is going to be a fun build.
Lake Modified
Active Member
choppinczech
Well-Known Member
Boy ain't that the truth. And I've made some doozies. But building my car still makes me jump out of bed every morning.
I like it. Keep posting pics as you go.
Go with two . . . there's nothing like the growl of a straight 6 with dual outlets!
Inline Six Hot Rods - Bing video
(I know . . it's not a Ford, but -
)
Last edited:
Lake Modified
Active Member
Cut the dash out. There will be a rollbar welded to the frame that will go up behind where the dash was. The quick disconnect steering wheel mount will be welded to that bar. There will also just be a couple of guages mounted to the right side of the bar right underneath the cowling...
[/IMG]
[/IMG]
[/IMG]
Lake Modified
Active Member
The interior will be all aluminum. Racked my brain figuring out how to do this. Finally came up with the idea of using these steel bars from Lowes. I cut slits every half inch so I could bend the bars to the contours of the body. They will be fiberglassed in using chopped up fiberglass mixed in resin (from the hamb) to bond them to the body. Hopefully this way they will not ghost from the outside. This may or may not be the best way to add the aluminum but it's what I came up with so that's that.....
[/IMG]
[/IMG]
[/IMG]
[/IMG]
Lake Modified
Active Member
Similar threads
